Argofet Battery Isolator 200A, 2-Batteries
Store Price:
$140.70
Export Price
$126.63
In stock
SKU
VIARG200201020R
Brand: Victron
Vendor SKU: ARG200201020R
Similarly to Argodiode Battery Isolators, Argofet Isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.In contrast with Diode Battery Isolators, FET Isolators have virtually no voltage loss. Voltage drop is less than0,02 Volt at low current and averages 0,1 Volt at higher currents.When using Argofet Battery Isolators, there is no need to also increase the output voltage of the alternator.However, care should be taken to keep cable lengths short and of sufficient cross section.Example:When a current of 100 A flows through a cable of 50 mm cross section (AWG 0) and 10 m length (30 ft), thevoltage drop over the cable will be 0,26 Volt. Similarly a current of 50 A through a cable of 10 mm cross section(AWG 7) and 5 m length (15 ft) will result in a voltage drop of 0,35 Volt!
