Classic Tilt Helm 2.4 HH6542-3
Store Price:
$1,474.50
Export Price
$1,327.05
In stock
SKU
TF65423
Brand: SeaStar Solutions
Vendor SKU: HH6542-3
SeaStar HH6542-3 Classic Tilt 2.4 Hydraulic Boat Helm Pump (Replaces HH6542 - 5 ORB Fittings Instead of 1/4" NPT)
Applications:
Most Hydraulic Steering applications for inboard/sterndrive/outboard boats up to 50ft.
Single outboard engine boats that travel up to 55MPH, for boats over 55MPH see SeaStar PRO Steering.
Capable to be used in multiple stations.
Replaces Teleflex Traditional Tilt Helm: HH5742.
Features:
Compact helm.
Standard 3/4" tapered steering shaft.
Accepts wheels up to 20".
Small 4.5" Hole cutout in dash.
Specification:
Front Mount Installation.2.4 cubic inches.1000 PSI Relief Valve Settings.Cautions:
Do NOT use teflon or loctite on the fittings.
Do NOT try to install NPT fittings into helm pump as it may cause damage to the threads.
The fluid cap must be in the uppermost position at ALL times.
NEVER use brake fluid, only SeaStar Steering fluid or Mil Spec H5606 Fluid.
Installation Notes:
The helm pump is packaged with re-positionable o-ring hose fittings (ORB).If a 20 mounting wedge is used, cut out dash as per mounting wedge template and mount helm directly to the 20 wedge.
The helm may be mounted with the helm shaft horizontal, vertical, or any angle in between.
Install the hose fittings before installing helm pump for ease of installation.
Applications:
Most Hydraulic Steering applications for inboard/sterndrive/outboard boats up to 50ft.
Single outboard engine boats that travel up to 55MPH, for boats over 55MPH see SeaStar PRO Steering.
Capable to be used in multiple stations.
Replaces Teleflex Traditional Tilt Helm: HH5742.
Features:
Compact helm.
Standard 3/4" tapered steering shaft.
Accepts wheels up to 20".
Small 4.5" Hole cutout in dash.
Specification:
Front Mount Installation.2.4 cubic inches.1000 PSI Relief Valve Settings.Cautions:
Do NOT use teflon or loctite on the fittings.
Do NOT try to install NPT fittings into helm pump as it may cause damage to the threads.
The fluid cap must be in the uppermost position at ALL times.
NEVER use brake fluid, only SeaStar Steering fluid or Mil Spec H5606 Fluid.
Installation Notes:
The helm pump is packaged with re-positionable o-ring hose fittings (ORB).If a 20 mounting wedge is used, cut out dash as per mounting wedge template and mount helm directly to the 20 wedge.
The helm may be mounted with the helm shaft horizontal, vertical, or any angle in between.
Install the hose fittings before installing helm pump for ease of installation.